RC4WD 1/24 Trail Finder 2 RTR RC Crawler Truck w/Mojave 2 Hard Body Set – Red

Enjoy all the fun of our popular 1/10 Trail Finder 2 in a 1/24 scale version!

This 1/24 Trail Finder 2 comes with all the true to scale detailing and quality performance to crawl through any terrain. Performance of the 1/24 is smooth with its R6 Mini Transmission, 4WD Drive-train, and 1/24 D44 Scale Axles, the 1/24 TF2 comes with Plastic 0.7" Beadlock wheels wrapped in some super scale Mickey Thompson 0.7" Baja Claw TTC Scale Tires to keep you trailing!

Whether it's outside on a trail or inside of your living room on an improvised course, the 1/24 TF2 comes prepared for creative challenges and is a perfect choice for any thrill seeking enthusiast. Experience all the fun and performance of the TF2 RTR, now in 1/24th scale!

Are you ready for your off-road experience?


Features

1/24 Trail Finder2 CNC Aluminium Chassis Set

RC4WD Plastic Punisher Shafts (32mm - 37mm / 1.26" - 1.46")

RC4WD 1/24 D44 Plastic Complete Axles

R6 Micro Transmission

Twister 5G Micro Servo

N30 Micro Motor

Spring Dampers for 1/24 TF2

Super Scale 0.7" Beadlock Wheels

RC4WD Mickey Thompson 0.7" Baja Claw TTC Scale Tires

RC4WD 7.4V 320mAh Lithium Ion Battery W/ Balance Plug

XR2 Ultimate Micro Radio and ESC/Receiver

Specifications
All New R6 Micro Transmission

Motor: 30:1

Internal Gear Ratio: 1.15:1

Gear Material: Hardened Brass and Steel

Case Material: Strong Durable Nylon

All New 1/24 D44 Plastic Complete Axles

Ratio: 2.67:1

Width at Hex: 71.6mm

Case Material: Strong Durable Nylon

Suspension: 4 Link Front and Rear Suspension

Wheels and Tyres

Type: OEM Plastic 0.7" Beadlock Wheels (Black)

Wheels Hub: Pin Type

Width: 10mm

OD: 19.5mm

Tyres: officially licensed Mickey Thompson Baja Claw tyres

Dimensions and Weight

Wheelbase: 120mm

Length: 203mm

Width: 91.7mm

Height: 88.7mm

Ground Clearance: 23.5mm

Final Drive Ratio: 2.67:1

Weight: 0.44lbs/0.2kg

What's Included

1x RC4WD 1/24 Trail Finder 2 RTR W/ Mojave II Hard Body Set (Black)

Notes

While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.

Use good quality hex drivers to avoid stripping screw heads.

Use thread lock when putting metal screws into metal parts.

Use thread lock sparingly.

Do not over tighten screws otherwise you may strip the thread.